Armstrong Carbon Steel EM Inverted Bucket for Horizontal Installation
For pressures up to 454 psig (32 bar)
Capacities up to 1,058 lb/hr (480 kg/hr)
Armstrong’s type EM forged steel inverted bucket steam trap combines the most reliable steam trap operating principle known in a body, which can be opened for Easy Maintenance.
High resistance to wear, corrosion and water hammer.
The free-floating guided lever valve mechanism is “frictionless” with all wear points heavily reinforced. All working parts are stainless steel; valve and seat are hardened chrome steel, individually ground and lapped.
Freedom from dirt problems. Condensate flow under bottom edge of bucket keeps sediment and “sludge” in suspension until ischarged by full differential purging action. Valve orifice opens wide – closes tight. There is no buildup of dirt, no close clearances to be affected by scale. Under normal conditions of reasonably “clean steam”, a strainer is not necessary. However, this is left to the user’s discretion.
Air handling ability. Vent in bucket top provides continuous automatic air and CO2 venting with no cooling leg and prevents air binding. Wiggle wire ensures clean vent hole at all times. Any steam passing through vent is condensed and discharged as liquid.
No steam loss. Steam does not reach the water sealed valve.
Inverted bucket traps require no adjustment and no live steam to operate.